Oricom ULTRA 9400 - Manual (Page 17)

15 HANDSET SETup
Ringer Tone
You may choose from ten different ringer tones and ten
different melodies.
From the Handset Setup Menu:
1. Press the [ ▼ ] or [ ▲ ] button to scroll to the RINGER
TONE sub-menu.
2. Press [ ] button to enter the menu. SET RINGER
TONE 01 shows in the display. 01 is default setting.
3. Use the [ ▼ ] or [ ▲ ] button to scroll to the desired
setting (1 through 20). You will hear a sample of the
ringer tone/melody you select.
4. Press the [ ] button to save your selection. You will
hear a confirmation tone and the selected ringer tone
shows in the display.
Note:
You must have the Ringer Volume set to ON for ring tone
to signal an incoming call.
Ringer Volume
From the Handset Setup Menu:
1. Press the [ ▼ ] or [ ▲ ] button to scroll to the RINGER
VOLUME sub-menu.
2. Press [ ] button to enter the menu. SET RINGER 1HI
2LOW 3OFF shows in the display.
3. Use the keypad on the handset to select 1, 2 or 3, or
use the [ ▼ ] or [ ▲ ] button to scroll to your selection. HI
is the default setting.
4. Press the [ ] button to save your selection. You will
hear a confirmation tone.
Note:
If you turn the ringer OFF, the ringer off icon shows in the
display.