Oricom ULTRA 9400 - Manual (Page 26)

24
Intercom Operation (applicable only
with additional handsets)
The intercom feature allows you to have a conversation
with another registered handset without tying up the
telephone line, allowing you to still receive incoming calls.
Making an Intercom Call
1. Make sure the handset is OFF (not in talk mode).
2. Press the int/conf [ ] button on the handset.
3. Use the keypad to select the handset you want to page.
Note:
To cancel page, press the int/conf [ ] button again or the
[ ] button on the sending handset.
4. Wait for the person at the receiving handset to press the
int/conf [ ] button.
Note:
If the receiving handset does not answer within two
minutes, the intercom call is automatically canceled. The
originating handset displays NO ANSWER.
5. When finished, press the [ ] button or int/conf [ ]
button on either handset to deactivate the intercom.
Receiving an Intercom Call
When you receive an intercom call, press the int/conf [ ]
button or [ ] button.
Advanced Intercom Features
Receiving an Incoming Call During an Intercom Call
If you receive a telephone call during an intercom call, the
intercom call is immediately terminated and all handsets
ring. Either handset user may press the [ ] button to
answer the call.
Using Intercom with External Telephone Calls
During a telephone call, you may use the intercom/paging
function to page another handset and have an off line,
private (two-way) intercom conversation. You may also have
a three-way conversation between the external caller and
the handsets, or you may transfer the external telephone
call to another handset.
Note:
Before you intercom/page another handset, you must
decide whether you want to create a two-way or a three-
way conversation.
TELEpHONE OpERATION