Oricom ULTRA 9400 - Manual (Page 38)

36
You may access the answering system with the cordless
handset or from any tone-dial compatible telephone.
Cordless Handset
Use the corresponding handset keys just like you would
use the base buttons (see “Answering System Setup”). The
button functions are located on the handset above each
number key. For example, to play messages:
1. Press the [
] button and use the [ ] or [ ]buttons
to scroll to DTAM MESSAGES.
2. Press the [ ] button to confirm, ANSWER REMOTE
ACCESS shows in the display.
3. Follow the voice instruction to use the answering
system’s remote functions.
Screening Calls from the Handset
Use the handset to screen calls even when you can’t hear
the answering system.
When the answering system picks up:
1. Press the [ ] button to access the answering system.
2. Listen as the caller leaves a message.
3. Press the [
] or [ ] buttons to speak to the person
or press the [ ] button to stop screening the call.
Accessing the Answering System from
Another Location
You can access your answering system from any touch-
tone phone by entering your 3-digit security code during
the playing of outgoing announcement or after you hear the
outgoing announcement.
1. Dial the telephone number to which the answering
system is connected.
2. E n t e r t h e s e c u r i t y c o d e d u r i n g t h e o u t g o i n g
announcement or after you hear the tone.
3. Follow the voice menu to use the answering system’s
remote functions.
The remote feature lets you perform the following functions:
To Press this button
Review message 1
Play back messages 2
Stop message playback 2
Erase message 0 (during message playback)
Skip message 3
Turn on/off answer 4
Review voice menu options 7
REMOTE ACCESS