Oricom ULTRA 9400 - Manual (Page 25)

23
Paging All Handsets from a Handset
(applicable only with additional hand­
sets)
1. Make sure the originating phone is OFF (not in talk
mode).
2. Press the int/conf [ ] button on a handset.
3. Press [ ] button to page all handsets.
4. To cancel the page, press the [
] or int/conf [ ]
button on the originating handset, or press the [ ]
button on the receiving handset.
Paging form base/Group Page
1. Press the [ ] button on base.
2. Use the keypad to enter the handset number you want
to page or press [ ] button to create Group paging.
3. All the registered handsets are being paged.
4. To cancel the page, press the int/conf [ ] button on
handset or [ ] button on base. Or you can press the
[ ] button or [ ] button on handset or [ Speaker ]
button on base to enter intercom mode.
Mute
To have a private, off-line conversation, use the MUTE
feature. The party on the telephone line cannot hear you,
but you can hear them.
1. During a conversation, press the [ ] button on base or
[ ] button on the cordless handset. MUTE ON shows
in the display.
2. Press the [ ] button on base or [ ] button on the
cordless handset to cancel and return to your phone
conversation.
Receiver Volume Control
When the handset is ON (in talk mode) you may adjust the
receiver volume by pressing the [ ] or [ ] button. There
are four volume levels to choose from. When the maximum
or minimum volume level is reached, the phone beeps
twice. VOL 1 is minimum and VOL 4 is maximum.
Do Not Disturb (DND)
DND allows you to mute the ringer on all handsets.
In the standby mode, press the [ DND ] button on the base.
The DND indicator will light and [ DND ] shows in handset
display. To cancel, press the [ DND ] button again.
TELEpHONE OpERATION