Oricom ULTRA 9400 - Manual (Page 35)

33
This section discusses the buttons and features on the
answering system.
The following messages show the status of the answering
system or help you set up and use the system.
0-59 Indicates the total number of messages.
CL(blinking) The voice time/day stamp needs to be set.
-- Answering system is turned off.
An (blinking) The system memory is full.
F (blinking) Answering system memory is full.
Six bars
(blinking) The system is recording a memo or an
announcement.
LA (Line
Access)
External line remote answering system.
Message Counter
The message counter gives you a numeric display of how
many messages you have. See below for the details.
a) Message counter has a number displayed without
flashing - No new messages. Shows total number of old
messages.
b) Message counter has a flashing number displayed -
There are new messages. Shows total number of old
and new messages.
c) Message counter has bars ( - - ) - Answerer is off.
d) Message counter has an “F” flashing on the display -
Memory is full.
e) Message counter has a “CL” flashing on the display -
Clock is not set since power up or after power failure.
f) Message counter has six horizontal bars flashing on the
display - MEMO recording.
g) Message counter has a “AN” flashing on the display -
Answering incoming calls and recording an incoming
call.
h) Message counter has “LA” - The answering system is
being accessed remotely.
i) Message counter has “En” on the display - English is
selected as the current voice prompt during language
selection.
j) Message counter has “Fr” on the display - French is
selected as the current voice prompt during language
selection.
k) Message counter has “SP” on the display - Spanish is
selected as the current voice prompt during language
selection.
Note:
While the messages are playing, the message counter will
display the messages in the order they were received.
The total recording time of this unit is 15 minutes.
ANSWERING SYSTEM OpERATION