Oricom ULTRA 9400 - Manual (Page 20)

18
Message Alert (for answering system)
This feature sets your answering system to give an alert
tone every 10 seconds when there are new messages.
From the Handset Setup Menu:
1. Press the [ ] or [ ] button to scroll to the MESSAGE
ALERT sub-menu.
2. Press [ ] button to enter the menu. NEW MSG
ALERT 1ON 2OFF shows in the display.
3. Use the touch-tone pad to enter the selection, or use
the [ ] or [ ] button to scroll to the 1ON or 2OFF. The
default setting is 2OFF.
4. Press the [ ] button to confirm. You will hear a
confirmation tone and the new setting shows in the
display.
Message Length
This feature allows the user to set the Memo recording time
and ICM recording time.
From the Handset Setup Menu:
1. Press the [ ] or [ ] buttons to scroll to the MESSAGE
LENGTH submenu.
2. Press the [ ] button to enter the menu. MESSAGE
LENGTH 3 MINUTE shows in the display.
3. Use the [ ] or [ ] buttons to scroll to your selection. “3
MINUTE” is the default setting.
4. Press the [ ] button to confirm.
HANDSET SETup