Oricom ULTRA 9400 - Manual (Page 32)

30 pHONE BOOk
Each handset can store up to fifty records in phone book
for quick dialling, each record can contain a maximum of
20-digit numbers and 15-character names.
View Records
1. Make sure the phone is OFF (not in talk mode).
2. Press the [ ] button to access the phone book sub-
menu.
3. Use the [ ] or [ ] buttons to scroll to VIEW
RECORDS.
4. Press the [ ] button to confirm. Display will show the
records.
5. Press the [ ] or [ ] buttons or key in alphabet to view
the records.
6. Press the [ ] button to confirm and the detailed
information will be shown in the display.
Add Records
1. Make sure the phone is OFF (not in talk mode).
2. Press [ ] button to enter Phone Book sub-menu.
3. Use the [ ] or [ ] buttons to select ADD RECORDS.
4. Press the [
] button to confirm, ENTER NAME shows
on the display.
5. Use the touch-tone pad to enter a name (up to 15
characters). More than one letter is stored in each of the
number keys.
Note:
If you make a mistake press the [ ] button to backspace
and erase the wrong character(s) or number(s).
6. Press the [ ] button again to save your selection. The
display shows ADD TEL NUMBER.
7. Use the keypad to enter the telephone number (up to
20 digits, including pauses), and press the [ ] button
to confirm, The records are stored alphabetically in the
phone book.
Inserting a Pause in the Dialling Sequence (of a Stored
Number)
Press the [ ] button on the handset’s keypad to insert a
delay in dialling sequence when a pause is needed to wait
for a dial tone (for example, after you dial 0 for an outside
line, or to wait for a computer access tone.) Each pause
counts as one digit in the dialing sequence.