Advanced settings, Recall time, R button on pbx phone systems – Oricom ULTRA 9400 User Manual
Page 41: R button and supplementary services, Dialling pause (pbx only)
39
Recall Time
You can use the Recall button on your telephone when
using your network operator’s services such as call waiting
etc. A subscription may apply for these services contact
your network operator for more information. If this function
is not working correctly change the setting using the
instruction below:
1. Press [
], scroll [ ] or [ ] to HANDSET SET and
press [
].
2. Scroll [ ] or [ ] to RECALL TIME and press [
].
3. Press [ ] or [ ] to select the setting you want:
SHORT, MEDIUM, LONG.
4. Press [
] to confirm.
5. Press [
] to return to standby.
Note:
Recall 1 (Short) has been set to 100ms and Recall 2
(medium) has been set to 300ms and Recall 3 (long) has
been set to 600ms. Recall 1 = Australia (100ms), Recall 3
= New Zealand (600ms). The default is Recall 1.
The user has the option to adjust the time to short,
medium or long (100, 300, or 600) if the unit is being used
in a situation that differs from the network standard. The
default recall time is suitable for your country and network
operator. It is unlikely that you should need to change this
setting unless advised to do so.
R button on PBX phone systems
If the telephone is connected to a PBX phone system
functions such as transferring calls and automatic call back
can be used via the R button.
R button and Supplementary services
Your telephone supports the supplementary services
offered by your telephone network provider, such as call
waiting and conference calls. The supplementary services
can be used in conjunction with the R button. Please
contact your telephone network provider with regard to
enabling the supplementary services and which recall time
must be used.
Dialling pause (PBX ONLY)
When using some older PBX phone systems, it takes a
little time before the dialling tone becomes available. It is
possible to insert a pause after the number for the outside
line so that the number can be dialled in a continuous
process without having to wait for the dial tone.
Press [# II] to insert a pause when entering digits.
ADvANCED SETTINGS