Oricom ULTRA 9400 - Manual (Page 21)

19
Rings to Answer (for answering
system)
This feature lets you select the number of times you want
the phone to ring before the answering system answers a
call.
From the Handset Setup Menu:
1. Press the [ ] or [ ] button to scroll to the RING TO
ANSWER sub-menu.
2. Press [ ] button to enter the menu. RING TO
ANSWER 3 4 5 6 TS shows in the display.
3. Use the [ ] or [ ] button to scroll to your selection.
The default setting is 5.
4. Press the [ ] button to confirm. You will hear a
confirmation tone and the new setting shows in the
display.
Note:
If you select Toll Saver (TS) the unit answers after the 3rd
ring if there are NEW messages, OR the unit answers
after the 5th ring if there are NO new messages. This
allows the user to access their answerer from another
location and then hang up after 4 rings to save long
distance charges.
Security Code (for answering system)
You can access the answering system from a tone dialling
telephone in another (remote) location. The security code
is required for remote access, and it prevents unauthorized
access to your answering system.
From the Handset Setup Menu:
1. Press the [ ] or [ ] button to scroll to the SECURITY
CODE sub-menu.
2. Press [ ] button to enter the menu. SECURITY
CODE 1 2 3 shows in the display.
3. Use the keypad to enter your new 3-digit security code.
The default setting is 123.
4. Press the [ ] button to confirm. You will hear a
confirmation tone and the new security code shows in
the display.
Note:
If you make a mistake, use the [ ] button to backspace
and erase the wrong digit.
HANDSET SETup