Input setup – Onkyo TX-SR600 User Manual
Page 55
55
Relationship between input source and listening mode
Input source signal
Analog/PCM
PCM fs96kHz
Digital Format
(display)
(2ch)
Dolby Digital
DTS
2ch source
(Multichannel)
(Multichannel)
Type of software
Tape, CD, MD,
DVD
DVD
DVD
DVD
Record, Tuner,
(96k/24bit)
DTS-CD
Digital satellite
DVD (Stereo), LD,
Digital satellite
Listening Mode
(Stereo)
Direct
o
o
Pure Audio *
1
o
o
Stereo
o
o
o
o
o
Dolby Pro Logic II
o
o
*
2
Dolby Digital
o
Dolby Digital EX
o
DTS Neo:6
o
DTS
o
DTS-ES Discrete
o
DTS-ES Matrix
o
Orchestra
o
Unplugged
o
Studio-Mix
o
TV Logic
o
All Ch Stereo
o
*
1
TX-SR700/700E only
*
2
This mode is not available for DTS sources.
Note:
You may not be able to select all the listening modes shown here depending on your speaker configuration or the selected input source.
Input Setup
f. Analog/PCM Source
This sets the listening mode for analog or PCM sources.
Analog sources consist of LP records, FM and AM broadcasts,
cassette tapes, and the such. PCM (Pulse Code Modulation) is one
form of digital audio signals and is recorded directly onto compact
discs and DVDs without compression.
g. PCM fs96kHz Source
This sets the listening mode for Digital PCM sources recorded with a
sampling rate of 96 kHz.
Note:
This setting will not appear if “----” is selected at the “Digital Input”
setting.
h. Digital Format Source
This sets the listening mode for Dolby Digital or DTS sources.
Note:
This setting will not appear if “----” is selected at the “Digital Input”
setting.