Onkyo TX-SR600 - Manual (Page 43)

43
Listening to RDS broadcasts
Displaying Radio Text (RT)
If the station you are currently tuned into is broadcasting RT signals,
they will be displayed in the front display of the TX-SR700E/600E.
If the station does not, this function will be ignored.
1. To display the radio text, press the
RT/PTY/TP button once.
• If the station you are currently listening to is not an RDS station,
only the frequency of the station will appear.
• If “Waiting” appears on the display, more time is required to
receive the RT information. When the information is received,
the characters will scroll across the front display.
• If “No Text Data” appears on the display, RT information is not
available.
• The display shows the frequency for 3 seconds and returns to
program service name.
Performing a PTY scan
1. Press the TUNER input source button
and select the FM input source.
2. Press the RT/PTY/TP button twice.
The current program type appears on the
display.
3. Using the / buttons, select the PTY
program type you desire.
4. Press the ENTER button.
The TX-SR700E/600E will scan until it
reaches a station of the program type you
selected. It will then stop briefly at that
station before continuing on until it reaches
the next station. Pressing the ENTER button
stops the PTY scan at that point. If you press
the RT/PTY/TP while “NONE” is
displayed, “PTY ?” will appear. In this case,
return to step 3.
5. Press the ENTER button when it
reaches the station to which you want
to listen.
“Not Found” will appear when no RDS
signal is being received from the station.
Performing a TP scan
1. Press the TUNER input source button
and select the FM input source.
2. Press the RT/PTY/TP button three
times.
“[TP]” will appear if the current station is broadcasting TP
signals. This station will periodically broadcast traffic
information. To find a different station, proceed to the next step.
Also, if “TP” is displayed, proceed to the next step.
3. Press the ENTER button.
The TX-SR700E/600E will scan until it
reaches a station broadcasting traffic
information. If “Not Found” appears on the
display, a TP station cannot be located.
RT/PTY/TP
TUNER
PRESET /
ENTER