Omega Engineering M-4066 - Manual (Page 53)

OMWT-SOFT-OPC Server OMWT-SOFT-OPC Server Data Logging N 49
File Format - Data Log
The log record format is as follows:
hh:mm:ss,mm/dd/yyyy,data1,data2,data3, ... , datan
Where:
hh:mm:ss is the time (ex. 23:40:50)
mm/dd/yyyy is the date (ex. 02/03/99)
datan - is the data for each device that has logging enabled.
Most devices have one value for the data. However 4 devices have different formats.
MANALOG: value1,value2,...,valuen, where n is the number of analog
channels enabled.
DIGITAL: inputa, inputb, outputa, outpub, countera, counterb,
COUNTER: countera, counterb - if both channels are enabled
PROBE3: value, temp (only for Probe3 that has temperature
compensation)
AIDO: ai1,ai2,ai3,ai4,do1,do2,do3,do4
DIGCOUNTER: dio.inputa, dio.inputb,cnt.inputa,cnt.inputb
CNTTEMP:
dio.inputa, dio.inputb,cnt.input, temp.input
FASTCNTTEMP: cnt.inputa,cnt.inputb,temp.input
ALARMTEMP: value,isalarm,isalarmtime,alarmtemp,alarmtime
IDR:
cardid,access,islocked,isbattery,doorheldopen,tamper,
irtype, batterylevel,into,strike,shunt,dooropen
DIRECTCNT: dio.inputa, dio.inputb,cnt.inputa,cnt.inputb
REPEATER: batteryvoltage, locatorid, 418cnt, 900cnt, netclass
OUTPUTDISC: outputa,outputb
OUTPUTANALOG:
outputvalue
Example log of a Pressure probe with temperature compensation and a
Temperature probe.
10:33:45,03/30/1998,21.28,21.15,29.71
10:34:05,03/30/1998,21.29,21.15,29.71
10:34:25,03/30/1998,21.29,21.15,29.71
10:34:45,03/30/1998,21.33,21.15,29.71