Omega Engineering M-4066 - Manual (Page 37)

OMWT-SOFT-OPC Server OMWT-SOFT-OPC Server Tags N 33
Temperature/Humidity: HUMIDITYn
(OMWT-TEMPRH)
online (R) - indicates if the device is communicating (0 or 1)
polltime (R/W) - how often to poll the device (in milliseconds)
nodaladdress (R) – (TCP/IP Receiver). The node address starts at 1. For
TCP/IP Receivers, the node address corresponds to the node number
for the TCP/IP connection.
repeateraddress (R) – (Wireless mode) contains the location identifier of
the OMWT-REPEAT repeater. If the sensor did not pass through a
repeater then the value is 0.
serialno (R) - registration number of the temperature sensor
input.value (R) - current value of the pressure sensor in engineering units
input.raw (R) - current value in inches of Hg.
input.binary (R) - current value in binary units from the pressure probe.
input.conv (R/W) - calibration and unit conversion parameters string.
(Cal1Raw,Cal1Engr,Cal2Raw,Cal2Engr,TempCoeff,TempCalib)
input.units (R/W) - units of the "%RH".
input.deadband (R/W) - deadband filtering in % of engineering Units
desc (R) - General identification description field.
tempflag (R) - Indicates if a temperature sensor is present in probe.
(R) – indicates that the tag is readable.
(R/W) – indicates that the tag is both readable and writeable. OPC Write operations
will either change an I/O point at the device, or an operation will be performed.