Omega Engineering M-4066 - Manual (Page 36)

32 N OMWT-SOFT-OPC Server Tags OMWT-SOFT-OPC Server
Digital I/O: DIGITALn
online (R) - indicates if the device is communicating (0 or 1)
nodaladdress (R) – (TCP/IP Receiver). The node address starts at 1. For
TCP/IP Receivers, the node address corresponds to the node number
for the TCP/IP connection.
repeateraddress (R) – (Wireless mode) contains the location identifier of
the OMWT-REPEAT repeater. If the sensor did not pass through a
repeater then the value is 0.
polltime (R/W) - how often to poll the device (in milliseconds)
serialno (R) - registration number of the temperature sensor
inputA (R) - level of PIOA (0 or 1)
inputB (R) - level of PIOB (0 or 1)
counterA(R) - counter of the activity latch of PIOA
counterB (R) - counter of the activity latch of PIOB
counterAB (R) - counter A minus counter B
outputA.value (R/W) - current value of the output of PIOA (0 or 1)
outputB.value (R/W) - current value of the output of PIOB (0 or 1)
outputA.ondemand (R/W) - 1 - output on demand; 0 - on next poll (0 or 1)
outputB.ondemand (R/W) - 1 - output on demand; 0 - on next poll (0 or 1)
input.descA (R) - General identification description field for channel A.
input.descB (R) - General identification description field for channel B.
(R) – indicates that the tag is readable.
(R/W) – indicates that the tag is both readable and writeable. OPC Write operations
will either change an I/O point at the device, or an operation will be performed.