Omega Engineering M-4066 - Manual (Page 19)

OMWT-SOFT-OPC Server OMWT-SOFT-OPC Server .ini File Format N 15
OMWT-SOFT-OPC Server .INI File
Format
OMWT-SOFT-OPC.ini
The OMWT-SOFT-OPC.INI file contains the configuration parameters for the server
and the devices being polled. When OMWT-SOFT-OPC searches and finds a new
device it adds the device to the INI file and assigns default initial parameters. These
parameters can be changed by using a text editor and editing the INI file, or by using
the included OMWT-SOFT-OPC.ini Editing Utility, which will be discussed later in
this Help. (The installation program for OMWT-SOFT-OPC Server created a short
cut to the OMWT-SOFT-OPC.INI file.) Double clicking will automatically start
WordPad or Notepad. The following rules must be kept when editing the INI file.
1) All device label names must be unique.
2) The NumberDevices in the [Server] section must equal the largest device
section [Devicen].
3) The must be no missing device sections [Devicen] in the list.
Note: OMWT-SOFT-OPC looks at the ini file only at startup or after adding a new
device. Changes made to the ini file will not be reflected in OMWT-SOFT-OPC
until OMWT-SOFT-OPC is closed and restarted.
The following is a list of the OMWT-SOFT-OPC.INI parameters.