beautypg.com

Bi-amping the front speakers, Bi amp indicator (21) – Onkyo HT-RC180 User Manual

Page 21

background image

21

Connecting the AV receiver

—Continued

The FRONT L/R and SURR BACK/ZONE 2 L/R termi-
nal posts can be used with front speakers and surround
back speakers respectively, or bi-amped to provide sepa-
rate tweeter and woofer feeds for a pair of front speakers
that support bi-amping, providing improved bass and
treble performance.
• When bi-amping is used, the AV receiver is able to

drive up to 5.1 speakers in the main room.

• For bi-amping, the FRONT L/R terminal posts con-

nect to the front speakers’ woofer terminals. And the
SURR BACK/ZONE 2 L/R terminal posts connect to
the front speakers’ tweeter terminals.

• Once you’ve completed the bi-amping connections

shown below and turned on the AV receiver, you must
set the “Speakers Type(Front)” setting to “Bi-Amp” to
enable biamping (see page 51).

Important:
• When making the bi-amping connections, be sure

to remove the jumper bars that link the speakers’
tweeter (high) and woofer (low) terminals.

• Bi-amping can only be used with speakers that support

bi-amping. Refer to your speaker manual.

Bi-amping Speaker Hookup

Bi-amping the Front Speakers

1

Connect the AV receiver’s FRONT R positive (+)
terminal to the right speaker’s positive (+) Woofer
(low) terminal. And connect the AV receiver’s
FRONT R negative (–) terminal to the right
speaker’s negative (–) Woofer (low) terminal.

2

Connect the AV receiver’s SURR BACK/ZONE 2
R positive (+) terminal to the right speaker’s pos-
itive (+) Tweeter (high) terminal. And connect the
AV receiver’s SURR BACK/ZONE 2 R negative
(–) terminal to the right speaker’s negative (–)
Tweeter (high) terminal.

3

Connect the AV receiver’s FRONT L positive (+)
terminal to the left speaker’s positive (+) Woofer
(low) terminal. And connect the AV receiver’s
FRONT L negative (–) terminal to the left
speaker’s negative (–) Woofer (low) terminal.

4

Connect the AV receiver’s SURR BACK/ZONE 2
L positive (+) terminal to the left speaker’s posi-
tive (+) Tweeter (high) terminal. And connect the
AV receiver’s SURR BACK/ZONE 2 L negative
(–) terminal to the left speaker’s negative (–)
Tweeter (high) terminal.

Woofer (low)

Tweeter (high)

Tweeter (high)

Woofer (low)

Left speaker

Right speaker

TX-NR807_En.book Page 21 Tuesday, July 28, 2009 12:00 PM