Onkyo HT-RC180 - Manual (Page 123)

123
Controlling Other Components
You can use the AV receiver’s remote controller
(RC-745M) to control your other AV components,
including those made by other manufacturers. This sec-
tion explains how to enter the remote control code for a
component that you want to control: DVD, TV, VCR,
etc.
• Learn commands directly from another component’s
remote controller (see page 136).
• Program the ACTIVITIES buttons to perform a
sequence of up to 32 remote control actions (see
page 137).
The following REMOTE MODE buttons are prepro-
grammed with remote control codes for controlling the
components listed. You do not need to enter a remote
control code to control these components.
For details on controlling these components, see the
pages indicated.
You can look up for appropriate remote control code
from onscreen setup menu.
Note:
This setting can be carried out by using Onscreen Setup
Menu only.
Preprogrammed Remote Control
Codes
Onkyo DVD player (page 128)
Onkyo CD player (page 131)
Onkyo cassette recorder with (page 133)
SETUP
RECEIVER
ENTER
Looking up for Remote Control Code
1 Press the [RECEIVER] button fol-
lowed by the [SETUP] button.
The main menu appears onscreen.
If the main menu doesn’t appear, make
sure the appropriate external input is
selected on your TV.
2 Use the Up and Down [ ]/[ ] but-
tons to select “8. Remote Con-
troller Setup”, and then press
[ENTER].
3 Use the Up and Down [ ]/[ ] but-
tons to select “1. Remote Mode
Setup”, and then press [ENTER].
4 Use the Up and Down [ ]/[ ] but-
tons to select remote mode, and
then press [ENTER].
The category selection menu appears.
1. Remote Mode Setup
2. Activities
Setup
8. Remote Controller Setup
TV
DVD/BD
VCR/DVR
CBL/SAT
GAME
AUX
TV/TAPE
CD
PHONO
8–1. Remote Mode Setup
TV
TV/DVD
TV/VCR
8–1. Remote Mode Setup TV
TX-NR807_En.book Page 123 Tuesday, July 28, 2009 12:00 PM