Onkyo TX-SR605 - Manual (Page 62)

62
Using the Listening Modes—Continued
Analog and PCM Sources
*1. For PCM 176.4/192 kHz signals input through HDMI IN, only Pure Audio, Direct, and Stereo listening modes can be selected. (HDMI input only)
*2. If there are no surround back speakers, or Powered Zone 2 is being used, Pro logic II is used.
*3. Available only when using surround speakers.
*4. For T-D, Mono Movie, Orchestra, Unplugged, Studio-Mix, and TV Logic, PCM of 64 kHz, 88.2 kHz, and 96 kHz are processed at 32 kHz, 44.1 kHz,
and 88.2 kHz respectively.
: Requires 6.1/7.1 speakers. Not available while Powered Zone 2 is being used.
: Requires 7.1 speakers. Not available while Powered Zone 2 is being used.
Listening Modes Available for Each Source Format
Source format
PCM
Multichannel PCM
(32-192 kHz)
32-96 kHz 176.4/192 kHz
*1 Multichannel, 1/0, 1+1
Media
Listening mode
CD, TV, radio DVD
Pure Audio (not North
American models) ✔ ✔ ✔
Direct
✔ ✔ ✔
Stereo
✔ ✔
Multichannel
✔
Dolby D
Dolby Digital Plus
DTS, DTS 96/24
DTS Discrete/Matrix
DTS-HD High Resolution
Audio
DTS-HD Master Audio
TrueHD
PLII Movie/PLIIx Movie *2
✔
PLII Music/PLIIx Music *2
✔
PLII Game/PLIIx Game
*2
✔
Dolby Digital EX/Dolby EX
Neo:6
Neo:6 Cinema
✔
Neo:6 Music
✔
Neural Surround (North
American models only) ✔
Mono
✔
Onky
o Or
ig
in
al
DSP
*4
Mono Movie *3
Orchestra
*3
Unplugged *3
Studio-Mix *3
TV Logic *3
✔
All Ch Stereo
Full Mono ✔
T-D
✔
Tip: To check the format of the digital input signal, see “Displaying Source Information” on page 55.