Ricoh Aficio 3260C - Manual (Page 29)

Placing Originals
15
1
AAAA
Set the document guide to the
original size.
BBBB
Place the aligned originals face
up into the ADF.
1. Limit mark
2. Document guide
Note
❒ Straighten any curls in the orig-
inals before placing them in the
ADF.
❒ To prevent multiple sheets from
being fed at once, fan the origi-
nals before placing them in the
ADF.
❒ Place the originals squarely.
Batch
The Batch mode enables you to copy
originals of more than 100 pages as a
single document, even if you place
the originals into the ADF in install-
ments.
Important
❒ Place special originals, such as
translucent paper, one by one.
AAAA
Press [Special Original].
BBBB
Press [Batch], and then press [OK].
Note
❒ If [SADF] is displayed, change
the settings. See p.154 “Switch
to Batch (SADF)”.
CCCC
Place the first instalment of the
originals, and then press the
{{{{Start}}}} key.
DDDD
After the originals has been fed,
place the next instalment.
Note
❒ When the Sort, Combine, or Du-
plex function is set, press the
{{{{#}}}} key after all originals have
been scanned.
EEEE
Press the
{{{{Start}}}} key.
SADF
In SADF mode, even when an origi-
nal is placed one page at a time into
the ADF, each page is automatically
fed as it is placed.
Preparation
To use the SADF function, set User
Tools (Copier / Document Server
Features) such that [SADF] is dis-
played when you press [Special
Original]
. See p.154 “Switch to Batch
(SADF)”.
ADB029S
VenusC1_GB_Copy_F1_FM.book Page 15 Tuesday, January 17, 2006 3:43 PM