Ricoh Aficio 3260C - Manual (Page 35)

Basic Procedure
21
2
Copy Face Up
Use this function to reverse the order
of copies.
Preparation
Before using this function, register
"Face up" as a copy function key.
See p.144 “Copy Function Key: F1-
F5”.
AAAA
Press
{{{{Face Up}}}} key.
BBBB
Place originals, and then press the
{{{{Start}}}} key.
Job Preset
You can make settings for the next
copy job while copying is in progress.
If a long copy job is in progress and
you do not want to wait for it to fin-
ish, you can use this function to make
settings for the next copy job in ad-
vance. When the current copy job fin-
ishes, the next job begins automatically.
Reference
See “Job List”, General Settings
Guide.
AAAA
Press [New Job] when " Copying... "
is displayed.
BBBB
Make settings for the next copy
job.
CCCC
Place the originals in the ADF,
and then press the
{{{{Start}}}} key.
All originals are scanned.
After the current copy job, the next
job starts automatically.
Note
❒ Each job stored is allocated a job
number that is displayed on the
Reserved Job screen.
❒ To switch the display to the cur-
rent copy job press [Reserved
Job]
, followed by [Printing], and
then [Exit].
Editing Job Preset
You can check and change the con-
tents of preset jobs. You also can de-
lete preset jobs.
AAAA
Press [Reserved Job].
BBBB
Select the number of the job you
want to check or change.
VenusC1_GB_Copy_F1_FM.book Page 21 Tuesday, January 17, 2006 3:43 PM