Raritan Computer SX - Manual (Page 151)

C HAPTER 12: C OMMAND L INE I NTERFACE 133
IPMIDISCOVER
The ipmidiscover tool is user to discover Intelligent Platform Management Interface (IPMI)
servers in the network.
• The IP address range can be set using startIP and endIP.
• Only users belonging to the Administrator group are able to configure the support of
IPMI. The supported IPMI version 2.0.
The ipmidiscover tool syntax is:
ipmidiscover [OPTIONS] startIP endIP
All discovered targets supporting IPMI version 2.0 will be listed, allowing the user to select one
and execute the IPMI operations.
The command options are described in Table 46
Table 46 IPMIDiscover Command
C OMMAND D ESCRIPTION
[OPTIONS]
Two options are supported:
-t timeout [seconds] to complete the discovery
-i interval [seconds] between each ping
startIP Beginning IP address
endIP Ending IP address
Command Example
admin> IPMI > ipmidiscover -t 20 10.0.22.1 10.0.22.10
Discovering IPMI Devices :
IPMI IP: 10.0.22.2
IPMI IP: 10.0.22.7
It is possible for the IP address range to span different subnets.