Configuring users, Ntp command, Timezonelist command – Raritan Computer SX User Manual
Page 146: Table 37 ntp command

128
D
OMINION
SX
U
SER
G
UIDE
NTP Command
The ntp command lets the administrator determine if a Network Time Protocol (NTP) server
should be used to synchronize the SX clock to a reference.
The syntax of the command is:
ntp [enable
The command options are described in Table 36.
Table 37 ntp Command
C
OMMAND
O
PTION
D
ESCRIPTION
enable
Enable or disable the use of NTP.
primaryntpip
The NTP server to use first.
secondaryntpip
The NTP server to use if the primary is not available.
Command Example
The following example enables NTP.
admin > Config > Time > ntp enable true primaryntpip 132.163.4.101
Timezonelist Command
The timezonelist command returns a list of timezones and associated index values. The index
values are then used as part of the clock command.
The syntax of the command is:
timezonelist
Configuring Users
The following commands provided the administrators with the ability to manager users:
• addgroup
• adduser
• deletegroup
• deleteuser
• editgroup
• edituser
• groups
• users