RAD Data comm ASMi-52 - Manual (Page 41)

Installation and Operation Manual Chapter 3 Operation
ASMi-52 Ver. 2.5 Default Settings 3-5
Parameter Default Value
Control Port
Control port rate 9600 bps
Data 8
Parity None
Interface DCE
CTS =RTS
DSR ON
Port control mode Terminal
User name –
Password 1234
Pop alarm OFF
Security timeout 10 min
Call Out Mode None
Number of retries 1
Wait for connect 30 sec
Dial mode Tone
Alternate number mode Disable
Primary number –
Alternate number –
SHDSL Interface
Transmission mode Annex B
Power backoff Enable
Snext margin Disable
Current margin Disable
Asym PSD Symmetrical
Line prob* Fixed rate
Units with a 4-wire line interface support only
fixed rate.
Configured wire ASMi-52 2-wire = 2w
ASMi-52 4-wire = 4w
Loop attenuation threshold 0
SNR margin threshold 0