Roland TD-10 - Manual (Page 80)

Here you can edit the instruments.(i.e. snare drum kick etc.)
The TD-10 provides separate parameters for editing acoustic
or electronic drum sounds.
Selecting an instrument
On the TD-10, each sound,is referred to as an “instrument”
(INST). You’ll begin the sound-creating procedure by select-
ing the desired instruments.
fig.04-01
Procedure
(Example) Changing the snare
1. Press [INST].
The “INST” page will appear.
2. Strike the snare pad.
The name of the instrument being triggered by the snare pad
will appear at “Inst.” The “type” of the currently selected
instrument will appear at “Group.”
3. Use [INC/DEC] or the VALUE dial to select an instrument.
* There are instruments that cannot be selected There are some
instrument combinations that cannot be selected within the
same kit, or with certain trigger inputs. The V-EDIT process is
not available for all instruments (p. 136).
Selecting instruments
from the list display
Here you can choose the sound from the list of all instru-
ments.
fig.04-02
Procedure
1. Press [INST]-[F1 (LIST)].
The “INST LIST” page will appear.
2. Strike the pad whose instrument you wish to change.
The setting page for the pad you struck will appear. The cur-
sor will be at the name of the currently selected instrument.
3. Use the VALUE dial, [INC/DEC] or [CURSOR] to select
an instrument.
4. After you have selected an instrument, press [EXIT].
You will return to the “INST” page.
Function buttons
[F1 (PAGE <)]: The previous page of the list will appear.
[F2 (PAGE >)]: The next page of the list will appear.
You can also use the Function Key to scroll through the
instrument list at a higher speed.
To advance quickly
Hold down [F2 (PAGE >)] and
press [F1 (PAGE <)]
To move in reverse quickly Hold down [F1 (PAGE <)] and
press [F2 (PAGE >)]
* Instruments which cannot be selected for specific triggers are
indicated by a horizontal line as in the following diagram.
fig.04-03e
Instruments which cannot be selected
Chapter 3. Instrument settings
80