Roland TD-10 - Manual (Page 69)

■ Play the pads along with a preset pattern
When you have found a preset pattern that you like, you can play along with that pattern. While
sounding the click, adjust the volume balance of the drums, backing parts, and the click.
fig.00-117
1 Adjust the [BACKING] and [CLICK] [GROUP FADERS] lower than the other sliders.
2
Press [CLICK].
The click will begin sounding.
3 As described in “Playing back a preset pattern” (p. 68), play back the pattern.
4
Gradually raise the [BACKING] and [CLICK] GROUP FADER sliders to adjust the volume balance
with the drum kit.
2 1,4
Examples and convenient tips
69
Quick Star
t