Roland TD-10 - Manual (Page 54)

In this section we will start with drum kit number 36, and take you through the process of creating
an entirely different kit. Kit number 36 is a distinctive kit intended for rock, but we will turn this
into a sharper and more natural-sounding drum kit that might be suitable for fusion, etc. When
effects are being used, it will be difficult to hear how the instruments really sound, so let’s begin by
turning off all the effects.
fig.00-075
1 Press [KIT].
The “DRUM KIT” page will appear.
2
Use [INC/DEC] or the VALUE dial to select kit number 36.
fig.00-076
3
Press [F3 (FX SW)].
The following screen will appear:
fig.00-077
4 Where there is an indication of “ON” above the [F1]–[F4] buttons, press the button to turn the indica-
tion “OFF.”