Renesas Emulation Pod forM16C/20 Series M30200T-RPD-E - Manual (Page 5)

( 3 / 32 )
Preface
The M30200T-RPD-E is an emulation pod main unit for M16C/20 Series of Renesas 16-bit
microcomputers. The M30200T-RPD-E is used by connecting to the pod probe M302xxT-PRB and
the PC4701 emulator main unit, and is controlled by the emulator debugger.
This manual mainly explains specifications and setting up of the M30200T-RPD-E. For detail
information about the pod probe, the PC4701 emulator main unit and the emulator debugger, refer
to each user's manual.
To check the components of this product, refer to "Things to Check When Unpacking" in this manual.
If there is any question or doubt about this product, contact your local distributor.
To use the product properly
Precautions for Safety:
• Both in this User's Manual and on the product itself, several icons are used to insure
proper handling of this product and also to prevent injuries to you or other persons,
or damage to your properties.
• The icons' graphic images and meanings are given in Chapter 1 Precautions for
Safety. Be sure to read this chapter before using the product.