Renesas Emulation Pod forM16C/20 Series M30200T-RPD-E - Manual (Page 18)

( 16 / 32 )
Chapter 3. Specifications
Table 3.1 lists the specifications of M30200T-RPD-E.
Table 3.1 Specifications of M30200T-RPD-E
Usable emulator main unit
Usable MCU
Usable MCU mode
Emulation memory
Clock
Power supply range
Stack capacity used for emulator
Suspended cycles in run-time debug
Power supply to emulation pod
Operating temperature range
Storage temperature range
Overseas standards
PC4701
M16C/20 Series MCUs
Single-chip mode
1 MB
Xin: 10 MHz
Xcin: 32.768 kHz
+2.7 to 5.5 V
Up to 8 bytes
16-byte dump: Approx. 312 BCLK cycle
16-byte fill: Approx. 283 BCLK cycle
1. Supplied from an emulator main unit
2. The operating voltage of the emulation pod main unit is
determined by detecting the supply voltage of the target
system. When no target system is connected, or when
the supply voltage of the target system is more than 5.0
V, the operating voltage is 5.0 V.
5 to 35
°
C (no dew)
-10 to 60
°
C (no dew)
(1) U.S. EMI standards (FCC part 15 Class A)
(2) CE marking (EN55022, EN50082-1)