Renesas Emulation Pod M37641T2-RPD-E - Manual (Page 49)

( 47 / 68 )
Figure 5.1 Connection diagram 1/2
5.2 Connection Diagrams
Figures 5.1 and 5.2 show the connection diagrams of the M37641T2-RPD-E. These connection
diagrams mainly show the interface section, and the circuits which are not connected to the target
system such as the emulator's control system are omitted.
*: Signal processed in emulator
• Switches SW2, SW4, SW5 and
SW6 are not mounted.
• Test pin TP1 is mounted to Pin 1 of
the USB connector (J7).
• C15 and C16 are mounted on the
products whose last letter of the
serial number is "A" or a number.