Renesas Emulation Pod M37641T2-RPD-E - Manual (Page 36)

( 34 / 68 )
3.6 Connecting the PC4701 and Emulation Pod
To connect the emulation pod to the PC4701, use 120-pin flexible cable FLX120-RPD included with
this product package. Connect the PC4701 side connector of the FLX120-RPD to the cable connector
of the PC4701, then secure with the two screws.
(1) Connecting the Cable to the PC4701
Figure 3.15 shows how to connect the PC4701 and FLX120-RPD.
Figure 3.15 Connecting the PC4701 and FLX120-RPD
CAUTION
Notes on Connecting the Cable:
• To connect the FLX120-RPD, be sure to hold the both sides of the PC4701 side
connector horizontally with the "UPSIDE" facing up.
• Always shut OFF power before connecting the FLX120-RPD. Otherwise internal
circuits can be destroyed.
Note on Securing the Screws:
• After connecting the FLX120-RPD to the PC4701, be sure to secure the screws
mounted in both sides of the connector.