Roland FR-3x - Manual (Page 60)

Connecting to MIDI devices
60
r
FR-3x V-Accordion
Orchestra/Organ Octave TX
This parameter allows you to transpose
the Note-on messages transmitted by
the Orchestra section.
Orchestra Bass TX/RX Channel
This parameter allows you to define the
MIDI channel for the ORCH BASS part.
■ 1~16
Specifies the orchestral bass part’s MIDI channel.
■ OFF
Select this setting if the orchestral bass part should
neither receive nor transmit MIDI data.
Orchestra Bass Octave TX
This parameter allows you to transpose
the Note-on messages transmitted by
the orchestral bass part.
Orchestra Chord TX/RX Channel
This parameter allows you to define the
MIDI channel for the orchestral chord
part.
■ 1~16
Specifies the orchestral chord part’s MIDI channel.
■ OFF
Select this setting if the orchestral chord part should
neither receive nor transmit MIDI data.
Orchestra Chord Octave TX
This parameter allows you to transpose
the Note-on messages transmitted by
the orchestral chord part.
Orchestra Free Bass TX/RX Channel
This parameter allows you to define the
MIDI channel for the orchestral Free
Bass part.
■ 1~16
Specifies the orchestral Free Bass part’s MIDI channel.
■ OFF
Select this setting if the orchestral Free Bass part
should neither receive nor transmit MIDI data.
Orchestra Free Bass Octave TX
This parameter allows you to transpose
the Note-on messages transmitted by
the orchestral Free Bass part.
Basic Channel TX/RX
This parameter allows you to set the
basic MIDI channel.
The “Basic Channel” can be used for
selecting Sets from an external MIDI device (using pro-
gram change numbers). Please see “MIDI implementa-
tion” on p. 71 for the program change numbers of the
Sets.
The assignment set here applies both to the transmis-
sion (“TX”) and reception (“RX”) of MIDI data.
■ 1~16
Specifies the Basic Channel number.
■ OFF
Select this setting if no MIDI data should be trans-
mitted/received on the Basic Channel.
Control Channel TX
The “Control Channel” is used for send-
ing program change messages (see
p. 62). This parameter allows you to set
the control MIDI channel number.
The assignment set here applies both to the transmis-
sion (“TX”) and reception (“RX”) of MIDI data.
■ 1~16
Specifies the Control Channel number.
Value –3~0~3
Default setting: 0
Value 1~16, OFF
Default setting: 5
Value –3~0~3
Default setting: 0
Value 1~16, OFF
Default setting: 6
Value –3~0~3
Default setting: 0
OrO
Obs
ObO
OCH
OCO
Value 1~16, OFF
Default setting: 7
Value –3~0~3
Default setting: 0
Value 1~16, OFF
Default setting: 13
Value 1~16, OFF
Default setting: 13
Ofb
OfO
bCH
cCH
FR-3x GB.book Page 60 Thursday, March 18, 2010 6:37 PM