Roland FR-3x - Manual (Page 38)

Saving your settings (User Program)
38
r
FR-3x V-Accordion
11. Saving your settings (User Program)
Your FR-3x contains 10 User Program memories where you can store the settings listed below. Working with those mem-
ories has the advantage that you can recall frequently used settings at the press of a button. The User Program settings
also include the “address” of the last Set you selected.
The following settings are saved to the User Programs:
Saving the current settings
Here is how to save the current settings.
1. Press and hold the [USER PROGRAM] button
to select write mode.
The display now shows a flashing “UP–” message.
The USER PRG indicator below the display lights to
indicate that the FR-3x is now in User Program mode.
NOTE
If you made a mistake and do not want to save your set-
tings, press the [USER PROGRAM] button to leave this
function.
2. Press the treble register ([1]~[0]) that is
assigned to the User Program memory
where you want to save your settings.
The “–” to the right of “UP” changes to the number of
the selected User Program. This means that the FR-3x
is now using the settings you have just saved. The
display indication stops flashing.
3. Press the [USER PROGRAM] button again to
leave this mode.
The USER PRG indicator below the display goes dark
to indicate that the FR-3x is no longer in User Pro-
gram mode. At this point, the FR-3x returns to the
settings you were using before selecting User Pro-
gram mode, and the display once again shows the
main page.
Set Number of the current Set
Treble section
Register
Octave setting
Bass-to-Treble mode
Orchestra
Register
Octave setting
Level
Organ
Register
Octave setting
Level
Bass & Chord section Register
Orchestral Bass
On/Off
Register
Level
Orchestral Chord
On/Off
Register
Level
Orchestral Free Bass
On/Off
Register
Level
Drum mode
On/Off
Drum Set number
Level
Free Bass
On/Off
Register
UP-
FR-3x GB.book Page 38 Thursday, March 18, 2010 6:37 PM