See “speaker mode” on p. 55), or 5 hours while the, P. 55, P. 55 *1 – Roland FR-3x User Manual

Page 55: Apo sp ola ust upg snd old sau

Auto Power Off

V-Accordion

This parameter allows you to specify how
long the FR-3x should wait before
switching itself off while you are not
using it.

The available options are:

WARNING: Be aware that any unsaved changes are
lost when the FR-3x is switched off by this function. Be
sure to save all important settings as soon as you can
(page 44).

Speaker Mode

When you use the FR-3x for live perfor-
mances and therefore connect it to an
external amplification system, it may be
convenient to switch off the FR-3x’s internal speakers,
because doing so preserves battery power. See also
“Switching off the internal speakers (Speaker Mode)” on
p. 37.

The “OFF” setting means that the internal speakers are
off. The “On” setting means that the internal speakers
are active.

Output Level Attenuation

The FR-3x has a level attenuation func-
tion that allows you to adapt its output
level to the audio device you wish to
connect it to. The attenuation value is expressed in dB.

NOTE

This parameter has no effect on the FR-3x’s internal speakers.

Other functions

The following functions are covered in the chapter
“Data management via the FR-3x’s USB port” on p. 40.

■ User Set load

This function allows you to load Sets
from a USB memory to one of the
four internal User memories. See
“Loading User Set memories from USB memory
(optional)” on p. 41.

■ User Program load

This function allows you load 10 User
Program settings from a USB memory
(provided you have already saved User
Programs to that USB memory). See also “Loading
User Program memories from USB memory
(optional)” on p. 40.

■ Sound Set load

This function allows you to add new
sounds to the FR-3x original sounds.
See “Loading new sounds from a USB
memory (optional)” on p. 41 for details.

■ FR-3 compatibility

This function allows you to import the
settings of a legacy FR-3 V-Accordion.
See “Importing the settings of a
previous FR-3 model” on p. 42 for details.

■ User Program save

This function allows you to save the
contents of the User Program memo-
ries to a USB memory (optional) con-
nected to the USB port. See “Saving User Program
memories to USB memory (optional)” on p. 40.

Value

OFF, 1~3

Default setting: 1

Setting