Panel descriptions, Treble control panel – Roland FR-3x User Manual
Page 12

Panel descriptions
12
r
FR-3x V-Accordion
4.
Panel descriptions
Treble control panel
A POWER button
Press this button to switch the V-Accordion on (the
button lights) and off (button dark).
NOTE
If you need to turn off the power completely (when using
the supplied AC adaptor), first turn off the [POWER] switch,
then disconnect the AC adaptor’s plug from the wall outlet.
B SORDINA switch
This MELLOW/BRIGHT switch allows you to switch the
simulation of the wooden resonance chamber on
(“BRIGHT”) and off (“MELLOW”).
C VOL knob
This knob allows you to set the V-Accordion’s overall
volume.
D BAL knob
This knob allows you to set the balance between the
Bass/Chord and the Treble sections.
E SET register
This register is used to recall one of 25 Sets from one
of the 10 Set families: press the [SET] register and one
of the 10 treble registers.
The [SET] register has three additional functions:
• To edit function and MIDI parameters: press and hold
[SET].
• To change octaves: press and hold [SET] and press
[1/OCT–] or [2/OCT+].
• To activate Bass-to-Treble mode: press and hold [SET]
and press [3] BS TO TREB.
F Treble registers
The Treble section contains 10 registers that allow
you to select accordion, orchestral and organ sounds,
Sets and User Programs.
NOTE
By pressing and holding any register, you can switch off
the treble or Treble Orchestra and Organ section. Press
another register to switch it back on.
G ORGAN/ORCHESTRA register
Pressing [ORGAN/ORCHESTRA] followed by one of
the treble registers recalls an orchestral or organ
sound.
This register has two additional functions:
• To activate the demo song function: press and hold
[ORGAN/ORCHESTRA].
• To select other functions: press and hold [ORGAN/
ORCHESTRA] and press one of the treble registers
[4]~[0].
H REVERB knob
Use this knob to set the level of the reverb effect (see
p. 22).
I CHORUS knob
Use this knob to set the level of the chorus effect (see
p. 22).
J USER PROGRAM button
This button is used to recall one of 10 User Programs:
first press [USER PROGRAM] and then one of the tre-
ble registers.
FR-3x GB.book Page 12 Thursday, March 18, 2010 6:37 PM