Ricoh Type 480 User Manual
Page 86

Configuring/Registering Scan Settings
78
7
Note
❒ The selected destination appears
while scanning the originals.
EEEE
To scan additional originals, load
them within the specified time.
Repeat this step until all originals
are scanned.
Note
❒ If you change settings while the
machine is waiting for addition-
al originals, the countdown
stops. If you load an original, it
is scanned, and the countdown
for loading additional originals
starts
FFFF
When scanning of all originals
and the countdown are complet-
ed, the machine automatically
s t a r t s s t o r i n g / s e n d i n g t h e
scanned data.
Note
❒ Alternately, you can press the
{{{{#}}}} key to start storing/sending
the scanned data.
When a Time Limit Is Not
Specified for Additional
Originals
AAAA
Specify scan settings, orientation
and output tray for the original.
Reference
p.73 “Specifying Scan Settings”
p.75 “Specifying the Orienta-
tion and Output Tray of the
Original”
BBBB
Select [Next Original Wait].
Note
❒ In [Scanner Features], if you set
[Next Original Wait at Off]
to [Con-
tinuous Wait]
, [Next Original Wait]
does not appear. Proceed to
Step
. In this case, the machine
operates as if [Next Original Wait]
has been selected.
CCCC
Make settings for sending by e-
mail, or Scan to Folder, storing, or
delivering.
Reference
p.19 “Procedure for Sending E-
mail”
p.34 “Procedure for Sending by
Scan to Folder”
p.44 “Storage Procedure”
p.60 “Delivery Procedure”
DDDD
Place the originals.
Scanning starts.
Reference
The procedure for placing the
originals is the same as that for
placing the originals for copy-
ing. For details about placing
the originals, see “Placing Orig-
inals”, Copy Reference.