Storage procedure – Ricoh Type 480 User Manual
Page 52
Storing Files
44
4
Storage Procedure
You can scan and store files.
AAAA
Press the
{{{{Scanner}}}} key.
Note
❒ The illustration is an example.
The actual appearance may be
different.
BBBB
Make sure that no previous set-
tings remain.
Note
❒ If a previous setting remains,
press the
{{{{Clear Modes}}}} key.
CCCC
Make settings for the original, such
as orientation and output tray.
Reference
p.75 “Specifying the Orienta-
tion and Output Tray of the
Original”
DDDD
Make the scan settings.
Reference
There are two ways to specify
scan settings, as described be-
low:
• Configure each setting for
scanning. For details, see
p.73 “Specifying Scan Set-
tings”.
• Recall registered settings. For
details, see p.80 “Programs”.
EEEE
Make the settings for storing scan
files.
A Press [Store File].
B Press [Store Only].
Note
❒ To store and deliver scan
files, press [Send & Store]. See
p.28 “Simultaneous Storage
and Sending by E-mail”, p.41
“Simultaneous Storage and
Sending by Scan to Folder”,
or p.65 “Simultaneous Stor-
age and Delivery”.
❒ [Store Only] cannot be pressed
if a destination or sender is
selected.
C Press [OK].
FFFF
Specify file information.
Specify a user name, file name, and
password for the file.
Reference
For details about specifying file
information, see p.45 “Specify-
ing file information”.
GGGG
Place originals.
ZZZ606S