Ricoh Type 480 User Manual

Page 82

Configuring/Registering Scan Settings

❖

❖ Scan Size

Select the size of the original to
be scanned.
When [Auto Detect] is selected,
the auto detect function of the
machine is used to set the origi-
nal size.
If you select [Custom Size], you
can specify the vertical and hor-
i z o n t a l d i m e n s i o n s o f t h e
scanned area in millimeters. Al-
ternatively, specify the horizon-
tal dimension only, and then set
the vertical dimension using
[Auto Detect]

Reference

For details about operations
under [Custom Size], see p.99
“Selecting a custom size”.

When the size is specified, scan-
ning is performed for that size,
regardless of the actual size of
the original. The following sizes
can be selected:
A0

R, A1RS, A2RS,

RS, A4RS,B1R,

RS,B3RS,B4RS,

× 48 inchR,

× 44 inchR,

× 42 inchR,

× 36 inchRS,

× 34 inchRS,

× 24 inchRS,

× 22 inchRS,

× 18 inchRS,

× 17 inchRS,

× 14 inchRS,

× 12 inchRS,

× 11 inchRS

❖

❖ Edit

Make editing settings.
• Erase Border

Delete the borders of the
scanned original according
to the width specified.
If you select [Same Width], you
c a n s p ec i fy , m i lli m et ers
(inches), a uniform width for
deleting all sides (top, bot-
tom, left, and right). If you
select [Diff. Width], you can
specify, millimeters (inches),
a different width for deleting
each side. You can specify a
value between 2 and 99 mil-
limeters (0.1 and 3.9 inches).

Limitation

❒ If you set [Scan Size] to [Au-

to Detect]

, or select [Auto

Detect]

for the vertical

length in [Custom Size],
[Erase Border]

becomes un-

available (If [Erase Border]
was selected beforehand,
[Erase Border]

is disabled).

• Positive / Negative

If you select [Positive / Nega-
tive]

, a black and white origi-

nal will produce a negative
scanned image.

Note

❒ If you select [Erase Border],

t h e d e l e t e d m a r g i n i s
made black.

• Mirror Image

If you select [Mirror Image], the
scanned image will be a mir-
ror image of the original.

CCCC

Press [OK].