Ricoh Type 480 User Manual

Page 43

Sending Scan Files by Scan to Folder

• Enter the path for the folder of a

client computer on the same
network directly.

• Specify the folder in the FTP

server.

• Select it from the client comput-

ers on the same network.

Note

❒ Destinations in the destination

list and registration numbers
must be registered in advance
in [System Settings]. For details,
see “System Settings”, General
Settings Guide.

❒ Depending on the security set-

tings, certain destinations may
not be displayed.

Selecting a destination folder
from the list

A Select the destination folder.

The selected folder is highlight-
ed and also is displayed in the
destination field at the top of the
screen.

Note

❒ If the target destination does

not appear, take one of the
following steps:
• Display the destination by

selecting its initial letter
from the title.

• Display the destination by

pressing [

U] or [T

T].

❒ If a protection code has been

set for the shared folder, a
screen for entering the pro-
tection code appears.

B To select more destination fold-

ers, repeat step

Note

❒ To deselect a destination, press

the destination once more, or
press [

UPrev.] or [T

TNext] to

display the destination in the
destination field, and then
press the

{{{{Clear/Stop}}}} key.

Using a registration number to
select a destination folder

A Press [Registration No.].
B Enter the five digit registration

number that has been assigned
to a destination folder using
the number keys.
If the entered number is less
than five digits, press the

{{{{#}}}}

key after the last number.
Example: To enter 00004
Press the

{{{{4}}}} key, and then

press the

{{{{#}}}} key.

Note

❒ If a protection code has been

set for the shared folder, a
screen for entering the pro-
tection code appears.

C To select more destination fold-

ers, repeat step