Roland HP305 - Manual (Page 68)

70
Connecting to Other Devices
fig.aaaa
Making the Connection
1. Turn the volume all the way down on the HP305/HP302
and on the MIDI device.
2. Switch off the power to the HP305/HP302 and the MIDI
device.
3. Use a MIDI cables (sold separately) to connect the MIDI
connectors to each other.
4. Switch on the power to the HP305/HP302 and the
connected MIDI device.
5. Adjust the volume level on the HP305/HP302 and the
connected MIDI device.
6. You should also set the MIDI transmit channel as needed.
For details on the MIDI transmit channel, refer to “MIDI
Transmit Channel Settings (MIDI Transmit Channel)” (p. 71).
Producing Sounds from a MIDI Sound Module by Playing the HP305/HP302
THRU OUT
MIDI
IN
MIDI Sound Module
MIDI cable
MIDI Out connector
MIDI Out connector
THRU OUT
MIDI
IN
MIDI Sound Module
MIDI cable
HP305 HP302
HP305_302_e.book 70 ページ ２０１０年１月５日 火曜日 午後１２時２分