Roland HP305 - Manual (Page 19)

21
Before You Play
Once the connections have been completed (p. 18), turn on power to your various devices in the order specified. By turning on
devices in the wrong order, you risk causing malfunction and/or damage to speakers and other devices.
Turning the Power On
1. Move the [Volume] slider all the way to the left to
minimize the volume.
2. Press the [Power] switch.
The power will turn on, and [Piano] button and [Reverb]
button will light.
After a brief interval, you’ll be able to produce sounds
by playing the keyboard.
* This unit is equipped with a protection circuit. A brief
interval (a few seconds) after power up is required before
the unit will operate normally.
* Always make sure to have the volume level turned down
before switching on power. Even with the volume all the
way down, you may still hear some sound when the
power is switched on, but this is normal, and does not
indicate a malfunction.
3. Use the [Volume] slider to adjust the volume (p. 21).
Turning the Power Off
1. Move the [Volume] slider all the way to the left to
minimize the volume.
2. Press the [Power] switch.
The screen goes blank and the power is turned off.
If you need to turn off the power completely, first turn
off the [POWER] switch, then unplug the power cord
from the power outlet. Refer to “Connecting the Power
Cord (HP305)” (p. 18) or “Connecting the AC Adaptor
(HP302)” (p. 18).
Here’s how to adjust the volume of your keyboard playing or the playback volume of an internal song or USB memory song.
If headphones are connected, use the [Volume] slider to adjust the headphone volume.
1. Turn the [Volume] slider to adjust the overall volume.
Adjust the volume while you play the keyboard to produce sound.
Turning the knob toward the right will increase the volume, and turning it toward the left will decrease the volume.
Turning the Power On/Off
1
2
On
Off
Adjusting the Sound’s Volume
Max Min
HP305_302_e.book 21 ページ ２０１０年１月５日 火曜日 午後１２時２分