Piano sound settings, Pedal settings, P. 59) – Roland HP305 User Manual
Page 57: P. 59
59
Various Settings
You can change the volume of the damper pedal resonance. On an
acoustic piano, depressing the damper pedal makes the notes you
play resonate with other strings, adding rich reverberations and
fatness to the sound. The damper pedal on the HP302/HP305
recreates this resonance (Damper Resonance) when depressed.
When you play the keys on an acoustic piano, the strings that are
already playing resonate as well. The function that reproduces this
effect is called “String Resonance.”
You can play the “key off” sound (the subtle sound produced when
the keys are released) obtained when playing an acoustic piano.
.
When you press the Damper pedal during Dual play or Split play, the
pedal effect is normally applied to both tones, but you can also
select the part to which the effect is to be applied.
When you turn on the power, the left pedal functions as the soft
pedal, and the center pedal functions as the sostenuto pedal (p. 22).
You can change the function of the pedal to a variety of other
operations.
* “Lyr (Layer)” and “Oct (Octave)” cannot be specified simultaneously
for the center and left pedals.
Piano Sound Settings
Producing Sympathetic Resonance When
You Press the Damper Pedal
(Damper Resonance)
Setting
Description
OFF, 1–10
The resonance volume decreases as the value is
lowered, while raising the value increases the
volume of the Damper Resonance.
The Damper Resonance function is not active when
the value is set to “OFF.”
Producing the Resonance of the Strings
When the Keys Are Played
(String Resonance)
Setting
Description
OFF, 1–10
The resonance level decreases as the value is
decreased, while increasing the value increases the
amount of resonance. The String Resonance
function is not active when the value is set to “OFF.”
Playing Sounds When the Keys Are
Released (Key Off Resonance)
Setting
Description
OFF, 1–10
The volume of the Key Off sound decreases as
the value is lowered, while raising the value
increases the volume of the Key Off sound.
The Key Off Resonance function is not active
when the value is set to “OFF.”
Pedal Settings
Changing How the Pedal Effects Are
Applied (Damper Pedal Part)
Setting
Description
Right & Left
All enabled
Right
Applied only to the Tone 1 (in dual mode)/Right-
hand Tone (in split mode)
Left
Applied only to the Tone 2 (in dual mode)/Left-hand
Tone (in split mode)
Changing How the Pedals Work
(Center/Left Pedal Function)
Function
Description
Sostenuto
Sets function to Sostenuto pedal.
* Selectable only for the center pedal.
Soft pedal
Sets function to soft pedal.
* Selectable only for the left pedal.
Start/stop
The pedal will have the same function as the
[
] button.
Layer
Pressing the pedal will layer on Tone 2, used for Dual
play.
* The Layer function can be applied only when
using Dual play.
Octave
Pressing the pedal will layer on a sound one octave
higher.
* The Octave function cannot be applied while
using Twin Piano, Dual play, or Split play.
HP305_302_e.book 59 ページ 2010年1月5日 火曜日 午後12時2分