Roland HP305 - Manual (Page 16)

18
Before You Play
Connecting the Pedal Cord (HP305)
Plug the pedal cord extending from the stand into the Pedal
connector located at the rear of the HP305’s bottom panel.
Connecting the Pedal Cord (HP302)
Plug the pedal cord extending from the stand into the Pedal
connector located at the rear of the HP302’s panel.
Connecting the Power Cord (HP305)
Check before you connect the power cord.
• Make sure that the [Power] switch is off (p. 21).
• Make sure that the [Volume] slider is minimized (p. 21).
1. Connect the included power cord to the AC Inlet
located at the rear of the bottom panel.
2. Plug the other end of the power cord into an AC
outlet.
You must use the power cord included with the HP305.
Connecting the AC Adaptor (HP302)
Check before you connect the AC Adaptor.
• Make sure that the [Power] switch is off (p. 21).
• Make sure that the [Volume] slider is minimized (p. 21).
1. Connect the supplied AC adaptor and power cord.
Place the AC adaptor so the side with the indicator (see
illustration) faces upwards and the side with textual
information faces downwards.
The indicator will light when you plug the AC adaptor
into an AC outlet.
Getting Ready to Play
Pedal connector
Pedal Cord
Pedal connector
Pedal cord
AC Inlet
Power cord
To AC Outlet
Indicator
AC Outlet
Power Cord
AC Adaptor
HP305_302_e.book 18 ページ ２０１０年１月５日 火曜日 午後１２時２分