Roland HP305 - Manual (Page 58)

60
Various Settings
Some of the internal songs have a tempo that varies during the
song.
If desired, you can make these songs play at a fixed tempo.
If Tempo Mute is turned on, the tempo indication in the screen will
be highlighted.
fig.d-EQ-Param.eps
Ordinarily, when playing back SMF music files for Roland Piano
Digital instruments (p. 83), the left-hand part is assigned to the [Left]
button, and the right-hand part is assigned to the [Right] button.
However, right-hand and left-hand part assignments in certain SMF
music files may differ.
If these are set to “Auto,” and as a result you are unable to use the
track buttons to control the left- and right-hand parts properly,
change the setting to “2/1 Part” or “3/4 Part.”
* This setting can be used for SMF format songs other than the
internal preset songs. It will not affect internal preset songs.
After changing this setting, try selecting the song once again.
If desired, you can specify that the sound of a track will play at a
reduced volume rather than going completely silent when you
press a track button and turn off its indicator.
This setting lets you play a specific part at a reduced volume and use
it as a “guide” for your playing.
When you turn off the power, the track mute volume will be reset to
“0.”
The HP305/HP302 may be unable to correctly recognize the type of
CD being used. In such instances, you can specify the type of CD
manually.
* Note that some commercial player piano CDs cannot be played back
on the HP305/HP302.
Other Settings
Playing Back at a Fixed Tempo
(Tempo Mute)
Setting Description
On
Tempo changes recorded in the song will be ignored, and the
song will play at a fixed tempo.
OFF
The song will play according to the tempo changes it
contains.
Changing the Parts Assigned to the Track
Buttons During SMF Playback (Track Assign)
Setting Description
The part assigned to each track will be determined
automatically, depending on the song file.
Assigns Part 1 to the [Right] button, Part 2 to the
[Left] button, and the remaining parts to the
[Accomp] button.
Assigns Part 4 to the [Right] button, Part 3 to the
[Left] button, and the remaining parts to the
[Accomp] button.
Lit if Tempo Mute is enabled
Using the Sound of a Specific Part as a
“Guide” (Mute Volume)
Setting Description
0 – 10 Increasing the value will make the sound louder.
Setting the Type of CD To be
Played Back (CD/Audio Type)
Setting Description
Auto
The CD type is detected automatically
Type A
General CDs for Player Piano contain audio and MIDI
data, and the data format may vary from one CD to
the next. If the CD’s data format does not match the
HP305/HP302’s settings, a “beep” will sound.
Certain general Piano player CDs may not be
playable on the HP305/HP302.
Type B
Stereo
Commercial Audio CD
(CDs other than those designed for use with the
player piano)
HP305_302_e.book 60 ページ ２０１０年１月５日 火曜日 午後１２時２分