Roland HP305 - Manual (Page 65)

67
Connecting to Other Devices
If you connect the HP305/HP302 to powered speakers or to an audio system that has line input jacks, you’ll be able to hear the HP305/HP302’s sound
from your powered speakers or audio system. If you connect your digital audio player or other audio playback device to the HP305/HP302’s, you’ll be
able to hear its sound via the HP305/HP302. Use audio cables (sold separately) to make connections.
fig.aaaa
1. Turn the volume all the way down on the HP305/HP302
and on the audio device you’re about to connect.
2. Turn off the power to the HP305/HP302 and audio
device.
3. Use audio cables (sold separately) to make the
connection.
4. Switch on the connected audio device.
5. Switch on the HP305/HP302.
6. Adjust the volume level on the HP305/HP302 and the
connected audio device.
The sounds from the connected audio device are played by the
HP305/HP302.
Adjust the volume by using the controls of your audio device.
Turning Off the Power
1. Turn the volume all the way down on the HP305/HP302
and on the audio device you’re about to connect.
2. Turn off the HP305/HP302.
3. Turn off the connected audio device.
Connecting to Audio Equipment
Caution when making audio connections
To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power on all devices before
making any connections.
When connection cables with resistors are used, the volume level of equipment connected to the inputs jacks may be low. If this happens, use
connection cables that do not contain resistors.
Having Audio from an External Device be Sounded Through the HP305/HP302.
Portable audio
player, etc.
Portable audio
player, etc.
Input jacks
Input jacks
HP305 HP302
1/4” plug RCA pin
HP305_302_e.book 67 ページ ２０１０年１月５日 火曜日 午後１２時２分