Service mode – Runco DTV-940/943 User Manual
Page 34
7-1
SERVICE MODE
Starting up the Service mode.
Use the control stick to highlight ‘Service’ and then press ENTER.
Some items in the Service mode are password protected (when the password
function is active). Enter your password to continue. All other password pro-
tected items are now also available if you stay in the adjustment mode.
ENTER continues to the Service Mode main menu.
EXIT returns to the Operational mode.
The service items are combined in two service menus. To switch from the first
to the second menu or vice versa, push the control stick forward or backward
to select ‘more...’
Overview flowchart ‘Service’ mode.
ADJUSTMENT MODE
Select a path from
below :
GUIDED
RANDOM ACCESS
INSTALLATION
EYE-Q
Select with
then
or
SERVICE
SERVICE MODE
PROJECTOR SETUP
MEMORY MANAGEMENT
COMMON SETTINGS
12C DIAGNOSTICS
IDENTIFICATION
TOTAL RUN TIME
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJECTOR ADDRESS
CHANGE BAUDRATE
POWER UP MODE
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
ALLSETTINGS MIDPOS
R & B CONVERGENCE
GREEN CONVERGENCE MID
G2 ADJUSTMENT
CRT RUN IN CYCLE
PROJECTOR WARM UP
MEMORY BANKS
Overview flowchart ‘Service’ mode
SERVICE MODE
PROJECTOR SET-UP
MEMORY MANAGEMENT
COMMON SETTINGS
12C DIAGNOSTICS
Select with
then
or