Roland GW-8 ReleaseNote 2 - Manual (Page 32)

32
The System Pedal Setting
With Version 2, you can switch pitch-bend modes using a foot pedal such as
Roland’s DP-2 or DP-10, or a BOSS FS-5U. To set this up:
On the Main screen, press MENU to display the Top Level menu. 1
Select System, and then press ENTER. 2
Press 3 4 repeatedly to display the SYSTEM PEDAL screen.
Set Pedal Assign to 4 Bend Mode , as shown above. Each time you
tap the pedal, the bend mode toggles between NORMAL and
CATCH+LAST.
To learn about the GW-8’s pitch-bend modes, see Page 46 of the
Owner’s Manual.
The End
We hope you’ve found this ReleaseNote helpful. Keep an eye out for
other GW-8 information and tools available for downloading at
www.RolandUS.com.