Roland D Station - Manual (Page 13)

MODE 2 - MIDI Receive Channel
This is where you set the MIDI receive channel for the D Station Rack. Use the ‘Mode’ but-
ton to select the ‘MIDI RX Ch.’ mode - LED on, and then the ‘Data Entry’ keypad to enter
your selection. The recognised numbers in this mode are from ‘01’ to ‘16’.
NOTE: the ‘MIDI RX CH.’ LED will flash when MIDI data is received on this channel.
MODE 3 - MIDI Transmit Channel
This is where you set the MIDI transmit channel for the D Station Rack. Use the ‘Mode’ button to select the ‘MIDI TX Ch.’
mode - LED on, and then the ‘Data Entry’ keypad to enter your selection. The recognised numbers in this mode are from
‘01’ to ‘16’.
NOTE: The MIDI Tx and Rx channel settings are memorized when the power is turned off.
MODE 4 - Utility
This is where you access the various Utility functions of the D Station Rack. See page 30 for full details on the operation
and features of the Utility mode.
MODE 5 - Save System Exclusive Data Dumps
This is where you ‘Save’ the D Station Rack programs onto a computer or other data storage device using MIDI sysex
dumps. There are two types of ‘Save’ as follows:
Type Function Display Ident.
1 Save single program SS
2 Save all programs SA
Data Entry/Program
MIDI/Utilities/Save
11