Nokia 3520 - Manual (Page 68)

[ 58 ]
4 Press Start, then speak the voice tag clearly into the microphone.
Note: Do not press Quit unless you want to cancel the recording.
The phone replays then saves the recorded tag. The icon appears
next to commands which have voice tags assigned.
Activate a voice command
After you have associated a voice tag with a phone function, you can issue
a command by speaking the voice tag. There are two ways to activate a
voice command:
1 If you have the optional headset attached, press and hold the headset
button.
OR
Press and hold Contacts.
2 When Please speak now appears, pronounce the voice tag clearly
into the microphone.
When the phone finds the tag, Found appears, and the command
is issued.
Work with an existing voice command tag
After you have associated a voice tag to a command, you can choose one
of the following options:
• Listen to the tag (Playback)
• Change the tag
• Delete the tag
• SEND YOUR OWN NUMBER IN CALLER ID
With each call you place, you can determine whether your telephone
number appears on another phone’s caller ID.
In most service areas, when you call others, your name is presented to
their caller ID (if they subscribe). With Send own caller ID, you can block
or send the display of your number when you make a call.
3520_3560.ENv1_9355099.book Page 58 Wednesday, February 26, 2003 3:31 PM