Nokia 3520 - Manual (Page 61)

[ 51 ]
Advanced calling features
2 Scroll to card A, B, C, or D and press Options.
3 Scroll to Edit and press OK.
Dialing sequence appears.
4 Press Select.
5 Press Scroll up or Scroll down to scroll through the list of dialing
sequences, as described in the following table.
6 Press Select.
(part 2)
The order of the following steps may vary, depending on which dialing
sequence your card uses.
7 When prompted for the calling card’s access number, enter the
number and press OK.
This number is usually the 1-800 number that is listed on the
calling card.
8 When prompted to enter a calling card number (usually shown on the
front of the calling card), enter the number (and PIN number if required)
and press OK.
Dialing sequence Use for cards that require you to
Access number
+ phone number
+ card number
Dial 1-800 access number, then phone
number, and then card number (+ PIN
if required).
Access number
+ card number
+ phone number
Dial 1-800 access number, then card
number (+ PIN if required), and then
phone number.
Prefix
+ phone number
+ card number
Dial the prefix (any numbers that must
precede the phone number) and phone
number you want to dial, and then card
number (+ PIN, if required).
3520_3560.ENv1_9355099.book Page 51 Wednesday, February 26, 2003 3:31 PM