Nortel Networks i2050 - Manual (Page 23)

IP Softphone 2050 Call Control window
23
Navigation arrows
To scroll through menus and lists in the display
area.
Use the Send/Enter key at the center of the
navigation cluster to confirm menu selection
(1100 series theme only).
Volume
decrease
increase
To increase or decrease the volume.
Headset To answer and make calls using the headset.
Handsfree
To answer and make calls using the handsfree
speaker.
Mute Mute key functionality is enabled or disabled by
your system administrator. Contact your system
administrator to determine if your
Mute key is
enabled.
If Mute key is enabled, click the Mute key to
mute the headset and listen to the receiving party
without transmitting. Click the
Mute key again to
return to two-way conversation.
Note: If Mute key is not enabled, clicking the
Mute key places the call on hold. Click the
Mute key again to restore the active call or
click the line key to restore the active call.
You cannot retrieve this call from hold by
clicking the Hold key.
The handset display indicates the Mute status
(
Mute On or Mute Off ).
Table 1: IP Softphone 2050 components and functions
(Part 2 of 4)
Element Function